There are four PLC Injection machines. Chilled water is generally circulated in the dies. Most dies are clamped and have ejection mechanisms. Wax assembly and Tree assembly is done in an air-conditioned room.

Temperature & humidity controlled shell room is used to build & dry the ceramic shells around the wax pattern assembly.

Colloidal Silica process is used. Ceramics used are Zircon, fused quartz and Alumina.

Shells are dewaxed using steam autoclave.

Dewaxed shells are fired in a shell burn out oven.

Metal from induction furnaces (with 150 kg crucibles) is poured into red hot shells. An Immersion pyrometer is used to measure metal temperature.